Forgings and castings for metallurgical industry

FORGINGS

Металлургия 3 (Сайт)

Molds for centrifugal casting of tubes, forgings for mill rolls, reeling rolls, forge rolling machines, rollers of straightening machines, roll sleeves, bushes, guiding columns and collars, knives, forgings for die tooling, plates, pipe shells etc.

Formed pieces: rams, dies, punches, bolster plates are made of steel grades 5CrNiMo, 4Cr5MoVSi, 56NiCrMoV7 etc. of ingots up to 120 tons. Weight of forgings 0,5 to 80 tons, thickness 140 to 800 mm, width 350 to 3 500 mm.

Plate forgings are made of steel grades 56NiCrMoV7, 42CrMo4 etc. Weight of forgings 1 to 5 tons, height 180 to 600 mm, width 200 to 1 250 mm, length 2 200 to 8 900 mm.

Forgings for mill rolls, reeling rolls, forge rolling machines, straightening machine rolls made of steel grades 60CrNi, St.50, 75CrMoV etc. are produced from ingots weighing up to 360 tons. Barrel maximum diameter is 2 210 mm.

Pipe stocks weighing 1 to 5 tons and diameter 150 to 650 mm are made of steel grades St.20, 09Mn2Si, 15MnSi, 12Cr1MoV, 15Cr1Mo1V etc.

Molds for centrifugal casting of pipes of steel grades 21CrMo10, 18CDV4, 21CrMo10Mod, 16CrMoNi etc. Molds are produced from ingots weighing 7.5 to до 290 tons. Internal diameter of piece – 300 to 2 000 mm, weight – up to 40 tons, length  2 500 mm to 8 500 mm.

Molds produced by OMZ-Special Steels are used for production of centrifugally cast pipes for heat supply, water supply, water carriage, as well as for chemical and oil and gas industry.

Forgings for roll sleeves and muffs are made of steel 150CrNiMo from ingots 5 to 18,5 tons. External diameter of product 500 to 1 500 mm, internal diameter 200 to 800 mm, height 350 to 650 mm.

Forgings for guide stanchions, knife forgings are made of 42CrMo4, S355J2 etc. Forging weight – up to 150 tons, length – up to 20 500 mm.

CASTINGS

Траверса (Металлургия).jpg

Our company is recommended as reliable producer of steel castings and ready to install details for machinery and metallurgy.

Our clients are such companies as BELAZ, TyazhMash, VMZ and others. Steel castings from 150 kg to 170 t can be one-of-a-kind or serial.

Product examples: 

  • Castings for metallurgy: press frames, mill housing, press cylinder, anvil blocks, matrix, supports, molds, yokes, bottom plates etc.

Steel grades (Casting Steels): 25, 20CrMo, 08MnCuNiV, 35CrMo, 30СrMoNi, 35CrNi2Mo, 35Cr18Ni24S2, 5CrMoNi, GS20Mn5.


Forgings Sales Department for metallurgical industry:
Phone: +7 (812) 322-81-28, fax: +7 (812) 322-80-07 
Contact Personnel: Yuriy A. Neshchadim 


Make an Enquiry

Request form


 
Mail to*
Mail from*
Contacts*
Message*
File
Protection from automated form filling
Please type in the symbols shown in the left image*
 
* - required fields